Skip to content
Rexgear_Itech IT-M3600 Series Regenerative Power System
Rexgear_Itech IT-M3600 Series Regenerative Power System
Rexgear_Itech IT-M3600 Series Regenerative Power System
Rexgear_Itech IT-M3600 Series Regenerative Power System
Rexgear_Itech IT-M3600 Series Regenerative Power System
Rexgear_Itech IT-M3600 Series Regenerative Power System
Rexgear_Itech IT-M3600 Series Regenerative Power System
Rexgear_Itech IT-M3600 Series Regenerative Power System
Rexgear_Itech IT-M3600 Series Regenerative Power System
Rexgear_Itech IT-M3600 Series Regenerative Power System
Rexgear_Itech IT-M3600 Series Regenerative Power System
Rexgear_Itech IT-M3600 Series Regenerative Power System
ITECH IT-M3600 Series Regenerative Power Supply
ITECH IT-M3600 Series Regenerative Power Supply

ITECH IT-M3600 Series Regenerative Power Supply

IT-M3600 regenerative power system integrates two instruments in one, which is a bidirectional power supply and a regenerative electronic load. When used as a load, its energy recovery function can convert the absorbed DC power into AC power and return it to the grid. When used as a power supply, it can also be used as a wide range bidirectional DC power supply. IT-M3600 combines the advantages of both instruments well, and its small size of only 1U half rack also help to save your space, time and cost. IT-M3600 with high-precision output and measurement, it is suitable for multiple test fields such as multi-module batteries, multi-channel power supplies, micro inverters, and semiconductor devices.

Features

  • 1U Half-rack, high power density
  • One button switch between source and load
  • Bidirectional energy flow between DUT and grid
  • Battery test
  • Battery simulation
  • 8 operating mode: CC/CV/CP/CR/CV+CC/CC+CR/CV+CR/CV+CC+CP+CR*1
  • Independent control of multi-channels,implement synchronization or proportional tracking
  • Parallel up to 16 units
  • CC/CV priority
  • High-speed measurement, keep 10 times / s update rate even connecting 16 stand-alone units
  • PV inverter I-V curve simulation*2
  • Adjustable output impedance
  • Programmable voltage and current rise and fall time*3
  • Temperature measurement function,over temperature protection
  • List programming
  • Various protection such as OCP / UCP / OVP / OTP / OPP / UVP, over heat protection, grid fault protection and fault storage, foldback, Power-off protection, sense abnormal protection
  • Automatic detection of power grid state to realize reliable grid connection
  • Precharge function to prevent overshoot of DC loading current
  • Anti-reverse protection function through optional accessories
  • Five optional cards, supporting RS232, CAN, LAN, GPIB, USB_T-MC, USB_VCP, RS485, analog and IO communication

Applications

Battery simulator, simulate the IV curve of different characteristics battery

Servo motor test, unmanned electromechanical test, smart meter test, etc.

Semiconductor IC, relay, wiring harness and other aging test

Power regulator, intelligent electronic switch IPS, auto central control box aging test

Various small capacity battery charge and discharge test

Electric bicycles, balance bikes, drone batteries, sweeping robot batteries, etc

Test in photovoltaic field, simulate IV curve of small photovoltaic array

Micro inverter, photovoltaic IC test, photovoltaic optimizer test

Civil Low Power Module Test

Bidirectional DC-DC module test, small inverter module test

1U Half Rack Mini Size

IT-M3600 is only 1U half-rack, but the power output is up to 800W. Besides high power density, it also has high resolution, high accuracy and high stability, etc. The output voltage is up to 600V and the output current is up to 30A. All series containing 12 models with ultra-wide range output design, can be widely used in various applications.

Model Options

ModelVoltageCurrentPower
IT-M3612 60V30A200W
IT-M3622 60V30A400W
IT-M3632 60V30A800W
ModelVoltageCurrentPower
IT-M3613 150V12A200W
IT-M3623 150V12A400W
IT-M3633 150V12A800W
ModelVoltageCurrentPower
IT-M3614 300V 6A 200W
IT-M3624 300V 6A 400W
IT-M3634 300V 6A 800W
ModelVoltageCurrentPower
IT-M3615 600V3A 200W
IT-M3625 600V3A 400W
IT-M3635 600V3A 800W

One Button Switch Between Source & Sink

IT-M3600 integrates two devices in a small size of 1U Half-rack, which not only be operated as a high performance bidirectional DC power supply; but also be operated as a regenerative e-load. Simulate various load characteristics and feedback power to grid without pollution, multi-functions in one. Users do not need to use software and any terminal equipment to switch operation mode, one button switching can greatly save time and space.

Parallel Function

IT-M3600 supports paralleling multiple units of same model to achieve higher current and power. Users may parallel units in master-slave operation according to different required current values. Up to 16 units can be in parallel. IT-M3600 can still have the same high-speed measurement capability as single unit after running in parallel with multiple units.

CC & CV Priority

IT-M3600 series continue the notion of CC & CV priority, help user to solve several critical problems with long-term testing. It can make the test easier especially for the applications like high speed power supply or no overshooting current. when need the testing occasions of voltage high speed, users can choose CV priority mode to get fast voltage rising time. Users can also choose CC priority mode to output no overshooting current, it's good for test DUT under CC working condition. This is used in various applications field such as laser test, IC test, charge and discharge test, transient simulation of power supply in automotive electronics and so on.

Modular Design, Flexible Combination

The flexible modular design makes it simple for IT-M3400 to stack directly, no need to purchase any accessories. The user may use IT-E154 optional rack mount kit to install one unit or more units into 19” rack case.

Multi-Channel Independent Control, Maximum 256 Channels

IT-M3600 Series is provided with independent multi-channel design.The channel sequence will be displayed when it combines to be a multi-channel power and electronic load system.The user can control each unit independently by PC software when connecting the communication interface of one unit with PC. Each channel can be operated separately. IT-M3600 Series supports maximum 16*16 channels. One 37U rack case contains 64 channels. The user may test DUT with different power ranges by parallel connection, making tests more flexible and device usage more efficient.

High Energy Regeneration Efficiency

IT-M3600 series is regenerative when working in sink under source mode, also regenerative working under load mode. The max regeneration efficiency is up to 90%, which can save the cost for both electricity and cooling system, achieving low noise testing environment.

~6307 kWh can be deducted from your electricity and cooling bill using 1pc IT-M3600 (800W) for 1 year

Battery Simulation Function

IT-M3600 support to simulate max. 99 cells in series and parallel connection. The users can quickly select battery matrix by setting battery voltage, capacity, resistance, SOC from the front panel. ITECH provides optional BSS2000 battery simulation software, users can self-define the battery curve by setting common parameters, also can set battery initial capacity to verify the DUT characteristics under different battery status. Meanwhile, BSS2000 supports to import matlab battery matrix or CSV. file with battery charging and discharging curve, so as to simulate real battery charge and discharge characteristics.

Optional BSS2000 Battery Simulation Software

Battery Test Functions

IT-M3600 series Regenerative Power System, which integrates power supply and regenerative electronic load into one unit, and adjustable output impedance design, can simulate the charging and discharging characteristics of the battery, and perform other testing, too. It can be used not only test the multiple single cells, but also comprehensive test the battery packages. It can also perform the battery setting and data processing in various test conditions and plot the test figure.

Optional ITS5300 Professional Battery Test Software can perform the following tests:

Working condition simulation, Battery DC IR test, Battery endurance test, Battery temperature test, Reliability test, Charge and discharge characteristic, Battery cycle life test, Battery capacity test, Over-charge and over-discharge endurance test, Battery conformity test.

Multiple Operation Modes

IT-M3600 provide CC/CV/CP/CR four basic operation modes based on power system mode.

IT-M3600 also provide CC+CR/CV+CR/CV+CC/CC+CV+CP+CR four compound operation modes based on load mode, which can adapt to the test requirements of various occasions.

CC+CR mode can be applied to OBC feature test of voltage limit, feature test of current limit, constant voltage accuracy test, constant current accuracy test, to prevent over current protection.

CV+CR mode can be applied to simulate LED light, test LED power, LED current ripple parameters.

CV+CC mode can be applied to load simulate battery, test charging station or car charger, the maximum loading current is limited, when the CV is working.

CV+CC+CP+CR mode can be applied to test lithium-ion battery charger, to gain complete V-I charging curve. In addition, when protection circuit of DUT is damaged, it can auto switch to avoid damage.

Optional Accessories

IT-M3600 also comes with optional USB, GPIB, LAN, RS-232, and an analog interface to support remote control and ATE system quick integration. For installation, ITECH provides with a specially designed rack mount kit IT-E154A/B/C. User can select different model according to different mounting patterns.

ModelInterface
IT-E1205 GPIB interface
IT-E1206 USB/LAN interface
IT-E1207 RS-232/CAN interface
IT-E1208 Analog
IT-E257 1U half rack instrument carrying case/bag/backpack
IT-E154A Rack kit to mount two (2) sets of IT-M series instruments
ModelInterface
IT-E1209 USB interface
IT-E118 Reverse power protection module
IT-E1203 Temperature sensor
IT-E154A/B/C Rack mount kit
IT-E154B Rack kit to mount one (1) set of IT-M series instrument
IT-E154C Sliding rail to be used with either IT-E154A or IT-E154B*1

Use by: